Error updating locale 7961

The phone will download it’s firmware and config via TFTP.It needs to download it’s config on every boot, so you will always need a TFTP server running.With Vo IP technology growing so rapidly, the marketplace so too has an ever growing selection of hardware options available for system implementations.The Cisco IP Phone series has solidified its position in the community as the leader of high quality and reliable hardware with feature rich firmware and a good range of supported protocols.or reboot your phone by pressing **#** quickly from the settings menu and wait.

This preparation also happens to be the procedure for upgrading a Cisco IP phone firmware.

here is how I got my Cisco IP Phone 7942 provisioned with Asterisk.

this is the result of a whole weekend on searching, flashing, codeing, rebooting, … anyhow, all the flashing of firmware, provisioning of configuration, localization, … furthermore a DHCP server announces the TFTP server. if you like you can already factory reset your phone. as the phone reboots, you should hold down the # key until the line buttons flash.

According to Cisco, when initiating a factory reset procedure certain information from the IP phone is erased while other information is reset to the factory default value, as shown in the list below: Information Erased: It is highly advisable to follow the firmware upgrade procedure in a non-working environment to ensure other phones are not affected (in case of an accidental reboot), and to avoid the freshly factory reset ip phones obtaining the working environment’s settings.

Cisco IP phone SCCP firmware files version 9.2., 7965 & 7975 IP phones (latest version at the time of writing this article) are available at our Cisco IP Phone & ATA Firmware Download section. When performing the factory reset procedure we are about to describe it is important to keep in mind that the IP phone will lose all configuration files and phone application.

Leave a Reply